167, Hala Perusahaan Menglembu 13,
Kawasan Perindustrian Menglembu,
31450 Menglembu, Perak, Malaysia.
+605-2812050
+6016-5242819
+6016-5242819
+605-2820376
- AIRTAC
- ACCESSORIES
- ACTUATORS
- AIR GRIPPER
- CLAMP CYLINDER
- COMPACT CYLINDER
- CYLINDER ACCESSORIES
- MINI MULTI-MOUNT, FREE MOUNT CYLINDER
- PLATE CYLINDER & THREADED CYLINDER
- RODLESS MAGNETIC CYLINDER & ROTARY TABLE CYLINDER
- ROTARY CLAMP CYLINDER
- ROUNDLINE CYLINDER
- SLIDE TABLE CYLINDER
- STANDARD CYLINDER
- TRI-ROD CYLINDER
- TWIN-ROD CYLINDER
- CONTROL COMPONENTS
- AIR VALVE (3/2 WAY)
- AIR VALVE (5/2 WAY, 5/3 WAY)
- AIR VALVE (ACCESSORIES)
- ANGLE SEAT VALVE (2/2 WAY)
- CONTROL VALVE (3/2 WAY)
- CONTROL VALVE (3/2 WAY, 5/3 WAY)
- CONTROL VALVE (5/2 WAY)
- FLOW CONTROL VALVE
- FLUID CONTROL VALVE (2/2 WAY)
- FOOT PEDAL VALVE (3/2 WAY)
- FOOT PEDAL VALVE (5/2 WAY)
- HAND LEVEL VALVE (5/2 WAY, 5/3 WAY)
- HAND LEVER VALVE (4/2 WAY, 4/3 WAY)
- HAND SLIDE VALVE (3/2 WAY)
- INTEGRATED SOLENOID VALVE (3/2 WAY)
- INTEGRATED SOLENOID VALVE (5/2 WAY, 5/3 WAY)
- INTEGRATED SOLENOID VALVE'S CABLE
- ISO STANDARD AIR VALVE (5/2 WAY, 5/3 WAY)
- ISO STANDARD SOLENOID VALVE (5/2 WAY, 5/3 WAY)
- MICRO-SOLENOID VALVE (3/2 WAY)
- NRV SERIES
- ORDINARY COILS
- PILOT-NO RETURN VALVE
- PUSH-PULL VALVE (3/2 WAY)
- PUSH-PULL VALVE (5/2 WAY)
- SOLENOID VALVE (3/2 WAY)
- SOLENOID VALVE (5/2 WAY, 5/3 WAY)
- SOLENOID VALVE (ACCESSORIES)
- LINEAR GUIDE
- PREPARATION UNITS
- CLEARANCE STOCK
- COMPRESSED AIR
- HYDRAULIC COMPONENTS
- KOMPASS HYDRAULICS
- ACCESSORIES(PRESSURE SWITCH, GAUGE, FILTERS)
- CARTRIDGE VALVE
- DIRECTIONAL CONTROL VALVES
- FIXED DISPLACEMENT PUMPS
- GEAR PUMPS & MOTORS
- HYDRAULIC PISTON PUMPS
- HYDRAULIC SYSTEM
- HYDRAULIC VARIABLE DISPLACEMENT VANE PUMPS
- LOGIC VALVES, NO LEAK VALVES
- MODULAR VALVES
- PRESSURE CONTROL VALVES
- PROPORTION VALVES
- SOLENOID OPERATED DIRECTIONAL VALVES
- METAL WORK PNEUMATIC
- ACTUATORS
- FITTINGS & ACCESSORIES
- FRL UNITS
- KIT PNEUMATIC MOTION
- VALVES
- 10-MM SOLENOID VALVES SERIES PLT-10
- MINI-VALVES SERIES VME
- MULTI-FLUID PROCESS VALVES
- MULTIPLE CONNECTORS
- SOLENOID VALVES PIV
- SOLENOID VALVES PIV IN LINE
- SOLENOID VALVES PIV ON BASE
- SOLENOID VALVES SERIES CNOMO
- TWO HAND SAFETY VALVE
- VALVE ISLANDS & FIELDBUS
- VALVES ISO 15407-1/VDMA 24563-02 SERIES MACH 18
- VALVES ISO 5599/1 SERIES IPV-ISV
- VALVES ISO 5599/1 SERIES SAFE AIR
- VALVES SERIES 70
- VALVES SERIES 70 ON BASE
- VALVES SERIES 70 SAFE AIR
- VALVES SERIES BASIC
- VALVES SERIES MACH 11
- VALVES SERIES MACH 16
- VALVES SERIES MINIMACH
- VALVES SERIES NAMUR
- VALVES SERIES PEV PEDAL OPERATED
- NEW PRODUCT
- PROJECT
I Pneulic Industries Supply Sdn Bhd
167, Hala Perusahaan Menglembu 13,
Kawasan Perindustrian Menglembu,
31450 Menglembu, Perak, Malaysia.
167, Hala Perusahaan Menglembu 13,
Kawasan Perindustrian Menglembu,
31450 Menglembu, Perak, Malaysia.
SOLENOID VALVES PIV ON BASE
| Previous | 9 / 9 | Next |
PIV.I Ø 8 mm on base, 2/2 NC, Ø 1.2mm
PIV.I Ø 8 mm on base, 2/2 NC, Ø 1.6mm
PIV.I Ø 8 mm on base 3/2 NC, Ø 1.2mm
PIV.I Ø 8 mm on base, 3/2 NCØ 1.6mm
PIV.T Ø 9 mm on base convey. drain, 3/2 NC, Ø 1.6
PIV.T Ø 9 mm on base convey. drain, 3/2 NO, Ø 1. 6
PIV.T Ø 9 mm on base, 3/2 NO, Ø 1.6
PIV.T Ø 9 mm on base, 3/2 NC, Ø 1.6
PIV.T Ø 9 mm on base, 3/2 NC, Ø 1.8
PIV.T Ø 9 mm on base convey. drain, 3/2 NC, Ø 1.8
PIV.T Ø 9 mm on base,3/2 NO, Ø 1.8
PIV.T Ø 9 mm on base convey. drain, 3/2 NO Ø 1.8
| Flow-rate at 6 bar DP 1 bar (Nl/min) | 42.9 |
| Insulation class | F 155 |
| Max drive frequency (Hz) | 30 |
| Max input pressure (bar) | 010 |
| Max temperature (°C) | 50 |
| Max torque for coil nut (Nm) | 1 |
| Min temperature (°C) | -15 |
| Protection degree | IP 65 EN60529 |
| Response time (ms) | 8÷15 |
| Time (Cycles) | 25 million |
| Voltage | 24VDC - 24VAC - 110VAC - 220VAC 50/60 Hz |
| Voltage tolerance | -10% ÷ 15% |
| Way scheme | 2/2 |
PIV.I Ø 8 mm on base, 2/2 NC, Ø 1.6mm
| Flow-rate at 6 bar DP 1 bar (Nl/min) | 0066 |
| Insulation class | F 155 |
| Max drive frequency (Hz) | 30 |
| Max input pressure (bar) | 008 |
| Max temperature (°C) | 50 |
| Max torque for coil nut (Nm) | 1 |
| Min temperature (°C) | -15 |
| Protection degree | IP 65 EN60529 |
| Response time (ms) | 8÷15 |
| Time (Cycles) | 25 million |
| Voltage | 24VDC - 24VAC - 110VAC - 220VAC 50/60 Hz |
| Voltage tolerance | -10% ÷ 15% |
| Way scheme | 2/2 |
PIV.I Ø 8 mm on base 3/2 NC, Ø 1.2mm
| Flow-rate at 6 bar DP 1 bar (Nl/min) | 42.9 |
| Insulation class | F 155 |
| Max drive frequency (Hz) | 30 |
| Max input pressure (bar) | 010 |
| Max temperature (°C) | 50 |
| Max torque for coil nut (Nm) | 1 |
| Min temperature (°C) | -15 |
| Protection degree | IP 65 EN60529 |
| Response time (ms) | 8÷15 |
| Time (Cycles) | 25 million |
| Voltage | 24VDC - 24VAC - 110VAC - 220VAC 50/60 Hz |
| Voltage tolerance | -10% ÷ 15% |
| Way scheme | 3/2 |
PIV.I Ø 8 mm on base, 3/2 NCØ 1.6mm
| Flow-rate at 6 bar DP 1 bar (Nl/min) | 0066 |
| Insulation class | F 155 |
| Max drive frequency (Hz) | 30 |
| Max input pressure (bar) | 008 |
| Max temperature (°C) | 50 |
| Max torque for coil nut (Nm) | 1 |
| Min temperature (°C) | -15 |
| Protection degree | IP 65 EN60529 |
| Response time (ms) | 8÷15 |
| Time (Cycles) | 25 million |
| Voltage | 24VDC - 24VAC - 110VAC - 220VAC 50/60 Hz |
| Voltage tolerance | -10% ÷ 15% |
| Way scheme | 3/2 |
PIV.T Ø 9 mm on base convey. drain, 3/2 NC, Ø 1.6
| Flow-rate at 6 bar DP 1 bar (Nl/min) | 52.8 |
| Insulation class | F 155 |
| Max drive frequency (Hz) | 30 |
| Max input pressure (bar) | 010 |
| Max temperature (°C) | 50 |
| Max torque for coil nut (Nm) | 1 |
| Min temperature (°C) | -15 |
| Protection degree | IP 65 EN60529 |
| Response time (ms) | 8÷15 |
| Time (Cycles) | 25 million |
| Voltage | 24VDC - 24VAC - 110VAC - 220VAC 50/60 Hz |
| Voltage tolerance | -10% ÷ 15% |
| Way scheme | 3/2 |
PIV.T Ø 9 mm on base convey. drain, 3/2 NO, Ø 1. 6
PIV.T Ø 9 mm on base, 3/2 NO, Ø 1.6
| Flow-rate at 6 bar DP 1 bar (Nl/min) | 49.5 |
| Insulation class | F 155 |
| Max drive frequency (Hz) | 30 |
| Max input pressure (bar) | 007 |
| Max temperature (°C) | 50 |
| Max torque for coil nut (Nm) | 1 |
| Min temperature (°C) | -15 |
| Protection degree | IP 65 EN60529 |
| Response time (ms) | 8÷15 |
| Time (Cycles) | 25 million |
| Voltage | 24VDC - 24VAC - 110VAC - 220VAC 50/60 Hz |
| Voltage tolerance | -10% ÷ 15% |
| Way scheme | 3/2 |
PIV.T Ø 9 mm on base, 3/2 NC, Ø 1.6
| Flow-rate at 6 bar DP 1 bar (Nl/min) | 52.8 |
| Insulation class | F 155 |
| Max drive frequency (Hz) | 30 |
| Max input pressure (bar) | 007 |
| Max temperature (°C) | 50 |
| Max torque for coil nut (Nm) | 1 |
| Min temperature (°C) | -15 |
| Protection degree | IP 65 EN60529 |
| Response time (ms) | 8÷15 |
| Time (Cycles) | 25 million |
| Voltage | 24VDC - 24VAC - 110VAC - 220VAC 50/60 Hz |
| Voltage tolerance | -10% ÷ 15% |
| Way scheme | 3/2 |
PIV.T Ø 9 mm on base, 3/2 NC, Ø 1.8
PIV.T Ø 9 mm on base convey. drain, 3/2 NC, Ø 1.8
| Flow-rate at 6 bar DP 1 bar (Nl/min) | 0066 |
| Insulation class | F 155 |
| Max drive frequency (Hz) | 30 |
| Max input pressure (bar) | 008 |
| Max temperature (°C) | 50 |
| Max torque for coil nut (Nm) | 1 |
| Min temperature (°C) | -15 |
| Protection degree | IP 65 EN60529 |
| Response time (ms) | 8÷15 |
| Time (Cycles) | 25 million |
| Voltage | 24VDC - 24VAC - 110VAC - 220VAC 50/60 Hz |
| Voltage tolerance | -10% ÷ 15% |
| Way scheme | 3/2 |
PIV.T Ø 9 mm on base,3/2 NO, Ø 1.8
PIV.T Ø 9 mm on base convey. drain, 3/2 NO Ø 1.8
| Flow-rate at 6 bar DP 1 bar (Nl/min) | 56.1 |
| Insulation class | F 155 |
| Max drive frequency (Hz) | 30 |
| Max input pressure (bar) | 6.5 |
| Max temperature (°C) | 50 |
| Max torque for coil nut (Nm) | 1 |
| Min temperature (°C) | -15 |
| Protection degree | IP 65 EN60529 |
| Response time (ms) | 8÷15 |
| Time (Cycles) | 25 million |
| Voltage | 24VDC - 24VAC - 110VAC - 220VAC 50/60 Hz |
| Voltage tolerance | -10% ÷ 15% |
| Way scheme | 3/2 |